Step 1: Turn Off the Radiator
If your radiators no longer work, but have never been removed from your home, you’re in luck—you can skip to Step 2.
Turn off the radiator and let it cool down before painting. Applying paint to a hot radiator will result in improper paint adhesion. You should be able to easily find the valve that controls the steam that heats the radiator and turn it to the off position. Generally, a radiator will cool down in approximately 30 minutes to an hour. When the radiator is still warm or close to room temperature, you should be able to start painting without affecting your finished results.
Step 2: Prepare to Paint
Prepare the area for painting. Cover the floor with a drop cloth and secure it with painter’s tape so it doesn’t get moved around and expose the floor while you’re working. Be sure you push the drop cloth underneath the radiator to avoid getting paint on the floor. Use painter’s tape to mask baseboards on which you don’t want paint. If you will be using aerosol paint, you need to protect the wall behind and around the radiator to avoid spraying paint on surrounding surfaces. Place a large piece of cardboard or poster board behind the radiator to protect the area.
Step 3: Remove Dust, Dirt, and Rust
Clean the radiator surface with mild detergent, water, and a scrub brush and rag. Remove all dust, dirt, and grime. Let the surface dry. Paint will not adhere well over rust, so the rust must be removed along with any existing, flaking paint. Remove both rust and flaking paint using a stiff wire brush. Use a shop vacuum to clean up debris.
Safety Alert!
Wear a dust mask and safety glasses when removing rust and any old paint.
Step 4: Choose the Right Paint
Use paint formulated for metal surfaces, such as X-O Rust® Paint & Primer in One, if your radiator is non-functioning. A working radiator should be covered with paint that can withstand high temperatures, such as Premium Décor® high-heat aerosol enamel or Premium Décor® non-aerosol oil-based, high-heat enamel.
Step 5: Paint the Radiator
Spray on a coat of True Value® X-O Rust Paint & Primer in One, Premium Décor high-heat aerosol enamel or apply non-aerosol high-heat enamel using a small- to medium-sized paintbrush. Spray painting gets the job done fast and provides excellent coverage and a smooth finish. Hold the can about 10” to 16” from the radiator and keep the can moving in a sweeping motion to avoid excess paint from dripping. Apply several thin coats (within an hour time frame) to avoid dripping.
If using a brush, start at the top and work your way down, getting in between the pipes for full coverage. Remember not to paint the valves, as they may stick and be difficult to open. Follow manufacturer instructions for dry times. Add a second coat if necessary.
Safety Alert!
Ventilate the room by opening a window while painting.
Great job! Your radiator has been painted and made to look new again.
Project Shopping List
Here’s what you’ll need to complete this project successfully.
- Drop cloth
- Painter’s tape
- Cardboard or poster board
- Mild detergent
- Scrub brush
- Rag
- Stiff wire brush
- Shop vacuum
- Dust mask
- Safety glasses
- X-O Rust® Paint & Primer in One
- Premium Décor® high-heat aerosol enamel
- Premium Décor® non-aerosol oil-based, high-heat enamel
- Small- to medium-sized paintbrush
