Types of Collated Fasteners

Collated Nails

Collated nails are packaged in strips or coils for use with pneumatic, gas, or cordless nailers. Strip nails typically come collated at 21°, 28°, 30°, or 34°, using plastic, wire, or paper tape.

For framing and load-bearing applications, use full round head nails to comply with building codes in seismic or high-wind zones. Clipped head nails offer higher magazine capacity but may not meet code in certain jurisdictions.

Choose ring shank nails for superior withdrawal resistance in treated lumber or subfloor assemblies. For temporary structures or easier disassembly, smooth shank nails are more appropriate. Materials include bright, hot-dipped galvanized, and stainless steel.

Browse collated nails to match your fastener type with tool and application requirements.

Find compatible tools in our Nailers category.

Collated Screws

Collated screws are engineered for use with auto-feed screw guns in high-volume environments such as decking, drywall, and fiber cement installations. Screw length, thread type, and tip design should be matched to substrate and tool system.

Drywall screws are available in fine-thread for metal studs and coarse-thread for wood framing. Deck screws feature self-drilling tips and corrosion-resistant coatings for outdoor use. Subfloor screws often include anti-lift shanks and ribbed heads to reduce board movement.

• Coatings: zinc-plated, ceramic, epoxy, or stainless for corrosion resistance
• Tips: self-drilling, sharp point, or auger point based on material hardness
• Head styles: flat, bugle, or wafer for flush or countersunk finish

Explore our full selection of collated screws for professional fastening solutions.

Collated Staples

Collated staples are categorized by crown width, leg length, wire gauge, and point style. Narrow crown staples (1/4"–3/8") are used for finish carpentry and cabinetry. Medium and wide crown staples suit sheathing, fencing, and insulation.

Material and tip type impact holding strength and penetration. Use chisel points for dense hardwoods or divergent points for increased grip in softer materials. Stainless steel staples are recommended in exterior or moisture-prone environments.

Tool compatibility depends on staple series and magazine format. Refer to stapler specifications to ensure correct fit and safe operation.