Simpson Strong-Tie 22 Oz. High-Strength Epoxy Adhesive with Nozzle & Extension
Model #SET3G22-NItem #107425 UPC 00707392247999
Tap to view
Product overview
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
- Superior bond strengths permit ductile solutions in high seismic areas
- Improved sustained load performance at elevated temperature
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning
- Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring
- Low-odor formulation
- For use with potable water
Specifications
| Color | GRAY |
| Material | Epoxy |
| Shelf Life | 24 Mo. |
| Cure Time | 24 Hr. |
| Container Size | 22 Oz. |
| Brand | Simpson Strong-Tie |
| UPC | 00707392247999 |
| Product type | Anchor Adhesive |
Product manuals and information
- DIY Projects & Ideas
- Related Product Articles
- California Prop-65 WarningWARNING:
WARNING! This product can expose you to chemicals including furfuyl alcohol and bisphenol-A which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
WARNING:WARNING! This product can expose you to chemicals including furfuyl alcohol and bisphenol-A which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
- Request Safety Data Sheet (SDS)