Step 1: Choose a location
Buy a set of ready-made clothesline poles. When choosing a location, keep your clothesline away from wires and trees or any objects where birds may perch. It is also good to install the clothesline away from high-traffic areas in your yard where children and pets play. For privacy’s sake, choose an area of your yard that has the least visibility to neighbors and passersby.
Helpful Tip
If possible, align the direction of the clothesline so that your clothes will receive the greatest amount of sunlight by running the line north to south. Your clothes will dry faster this way.
Step 2: Dig Holes
To permanently and securely install your clothesline poles you need to bury part of the poles in the ground so that they can support the weight of wet clothes on the line. Using a tape measure, map out how much space you want between your two poles and mark where you’ll dig the two holes with chalk or paint. It’s up to you how far apart the poles will be, but keep in mind that you want enough line space to hold all of your laundry, but too much line can sag in the middle and make wet clothes touch the ground when they’re on it.
Safety Alert!
Don’t just start digging in your yard. Check with your local utility companies about gas and water lines, telephone lines or any other utility line that could cause either a disruption in your service or worse, a potentially dangerous situation such as with a ruptured gas line.
Using a post-hole digger, dig two equidistant holes – one for each pole. Make the holes about 12″ – 18″ deep and 12″ wide. The bottom of the hole should be slightly wider than the top — this helps prevent any movement when the earth settles. Note: Pole height can vary a bit depending on how high you want your clothesline to be. Most poles are around 6′ to 7-1/2′ in height and can be found at your local True Value hardware store. In the end, you want the clothesline to be at the average height of a person or a couple inches taller to make it easy to hang clothes on.
Step 3: Plant the Posts
Fill one third of each hole with concrete mix, add water, and place each post into its hole. Then fill it the rest of the way with concrete. Use a level to ensure your post is straight then stake it in place with rope or heavy string so that it remains straight. Hint: This is much easier with an assistant. Let the concrete set for a day. After it is dry, remove the stakes and rope.
Step 4: String the Line
Tie a good-quality, nylon clothesline to the ends of each pole “T” and then tie the other end of the rope to the opposite “T” in the same way.
Congratulations! Now you’re giving your clothes dryer and the environment a break, not to mention you’re saving money on energy costs.
Umbrella Clothesline: Project Shopping List
Here’s what you’ll need to complete this project successfully.
Line-and-Pulley Clothesline: Project Shopping List
Here’s what you’ll need to complete this project successfully.
Pole-to-Pole Clothesline: Project Shopping List
Here’s what you’ll need to complete this project successfully.