We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
SharkBite
1/2 x 1/2 In. Slip Pipe Coupling, Lead Free
Model #
U3008LFA
Item #
143059
SharkBite
1/2 x 1/2 In. Slip Pipe Coupling, Lead Free
1/2 x 1/2 In. Slip Pipe Coupling, Lead Free is rated
out of
5 by
6.
$18.99
In stock
Model #
U3008LFA
Item #
143059
In stock
Description
1/2 x 1/2 slip coupling; lead free, bagged; sharkbite push-fit, u3008a; sharkbite push-fit fittings for use with copper tubing cts, CPVC; constructed of dzr brass, certified to 200 psi and 200 degrees f, design certified to asse 1061/nsf61 standards, meets upc, ipc and cupc requirements; fittings are listed with iapmo and are certified for use on potable and hydronic water distribution. certified for underground applications and as a manufactured joint without the need for access panels.
- Lightning fast, won't let go
- Easy installation, fast disassembly
- Use on wet or dry repairs
- No solder, clamps, unions or glue needed
Specifications
| SKU | 143059 |
|---|---|
| Weight | 0.270000 |
| UPC | 00697285465886 |
| Country of Origin | AU |
| Package Width | 8.25 |
| Package Length | 5.0 |
| Package Height | 1.08 |
| Model Number | U3008LFA |
| Brand | SharkBite |
| Assembled Width | 8.25 |
| Assembled Length | 5.0 |
| Assembled Height | 1.08 |
| Manufacturer Name | SHARKBITE/CASH ACME |
| California Residents Proposition 65 | This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Rated 5 out of
5
by
Larry D 44691 from
Saved a LOT of Work!
I had to remove 2, 50-year-old corroded, copper shutoffs that were leaking in my daughters house. They were no longer needed. Of course they were right next to a floor joist, partially under the center beam, and connected to T-fittings on the other side of the beam. I also had dropped ceiling supports in my way. The hardest part of the job was getting the pipes by the beam cut, squared, and deburred. (Think Milwaukee Hackzall, Dremel, small files, steel wool. I'd have had to do this anyway if I were sweating in the new pipe.) Once the pipes were ready, the straight couplings and slip couplings worked like a dream. I can’t begin to express how happy I am that I wasn’t sweating in fittings up there!
Date published: 2018-01-16
Rated 5 out of
5
by
winnipegglen from
Quick and easy fix to punctured pipe
When a nail found a 3/4" pex pipe during this weekend's framing project, this DIYer thought a plumber would be required to put a stop to the newly-created gusher. I gave this slip coupling a try, though I was skeptical. To my surprise, this unit was not only incredibly easy to install, it works like a charm, saving me an embarrassing call to the plumber, and possibly even my marriage! Highly recommended!
Date published: 2017-05-08
Rated 5 out of
5
by
sNoProblem from
I'll never solder again.
A pin hole leak in a 1/2" copper pipe in the ceiling created a "mystery" stain in my Mom's ceiling. After hiring a roofer ($300) a handyman ($100), the source remained a mystery. After opening a hole in the ceiling I found the source - a pin hole leak. Not wanting to solder a coupling sleeve, I checked the local code and purchased a SharkBite slip coupling. It installed easily and solved the leaking problem. Great product SharkBite
Date published: 2017-03-05
Rated 1 out of
5
by
Ronm13 from
Bad for tight area
I don't know if it's the area or not, but I followed instructions very carefully. The slip end went on perfect. It will not budge now after inserting the other pipe. The pipe is in about a 1/4 inch. Not nearly far enough. I've tried everything. WD40, tapping with a wrench, now I'm stuck. It won't go on all the way, and won't come off either. So frustrating, been at this hours. I'll try again tomorrow
Date published: 2016-09-27
Rated 1 out of
5
by
Steve72 from
Not easy to install
I needed a quick fix for my sprinkler outlet and tried this product. I watched the video and got my pieces cut and went to install. The barbs never bit as designed even after making sure the pipe was inserted correctly. I wasting a lot of time trying over and over. I noticed the barbs were flattened. When I tried turning on the water both ends leaked.
Date published: 2016-04-16
Rated 5 out of
5
by
firstdown80 from
Just Fantastic!
These push-to-connect or slip couplings from Sharkbite is simply amazing! I had a leaking water softener but to replace the softener head I had to remove all the copper pipes by cutting it because it was all welded together.
I cut my pipe at the inlet and outlet end and push these 2 couplings on each end and put everything back together. No leaks and just easy to install.
Date published: 2015-12-20
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.