Model #
414P
Item #
204468
Scotch
Extreme Mounting Tape, 1-In. x 5-Ft.
Extreme Mounting Tape, 1-In. x 5-Ft. is rated
out of
5 by
5.
$6.99
In stock
Model #
414P
Item #
204468
In stock
Description
Scotch, 1" x 5', extreme mounting tape, all weather tape that is highly conformable, works on many surfaces including wood, metal & concrete, holds up to 20 lb, 2" product per lb.
Specifications
| SKU | 204468 |
|---|---|
| Weight | 0.1200 |
| UPC | 00051141910840 |
| Country of Origin | US |
| Package Width | 3.75 |
| Package Length | 1.12 |
| Package Height | 5.38 |
| Model Number | 414P |
| Brand | Scotch |
| Manufacturer Name | 3M COMPANY |
Rated 4 out of
5
by
trying from
moderate success
tried mounting LED slight strip to saturnia tile forbaseboard lighting. LED strip is only 3/8 wide. Had to cut the tape. very difficult to cut and work with. used tape 1" every 5" or so. moderate success in holding. most stuck to wall . some stuck to LED trip. will try again with double the amount of tape.
Date published: 2019-09-09
Rated 1 out of
5
by
rayB from
not holding even after prep.
I bought this to hold a mic in place for my headphones (modmic 4 onto a akg7xx setup) to be a great audio setup for my pc but unfortunately this tape will not hold even after prepping the area with an alcohol wipe. I am constantly reapplying every day so this is a bummer that it isnt holding as expected
Date published: 2019-05-17
Rated 5 out of
5
by
Abuthemagician from
Plastic to metal, strong bond
We use this every day to attach plastic back plates to the metal doors of access control cans. I have mounted countless numbers of them and the tape supports the back plates, control boards AND the associated wiring. So far the heat in the cans has not caused any of the tape to fail.
Date published: 2018-06-02
Rated 5 out of
5
by
Redbull240 from
Aluminum to wood.... I tried to rip it off. Nope.
This tape is insanely strong. I'm not an undercover promoter here, just a poor redneck from Oregon. Make sure you read the directions on the back, you have to hold it for a certain amount of time.
Date published: 2018-05-24
Rated 3 out of
5
by
Identity Graphics from
Hope it works, it will be a great test
Have a 10# brass LV logo, going to be stuck to metal fascia. According to directions 30" of take will hold it....I saw where there are failures, but that was not the products fault, they used the wrong adhesive, and had they have read the directions would not have used it. I cannot recommend this product yet. I will let you know. If you do not see a posting it worked, I will try to post either way....I'm sure if it fails I will be all over it though. Rating it as a 5 for now, for good intentions.
Date published: 2017-02-14
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store(Optional)
Privacy Policy
Thanks for signing up!
Please add truevalue@message.truevalue.com to your address book.