Major Appliance Flat Extension Cord, 9-Ft.
This flat extension cord is only compatible with 250 volt, 20 amp major appliances and air conditioners. 9', 12/3 SPT-3 With Angle Cap, NEMA 6-20, UL listed.
- Three-conductor heavy-duty flat vinyl
- Right angle male plug
- Grounded, right angle, male plugs guard against accidental disconnection
- Reinforced blades help prevent accidental bending or breaking
- Heavy-duty strain relief protects electrical connections resulting in longer cord life
|Country of Origin||CN|
|Manufacturer Name||SOUTHWIRE/COLEMAN CABLE|
|California Residents Proposition 65||www.P65Warnings.ca.gov/productThis product contains material that, the State of California has determined, may cause cancer, birth defects, or other reproductive harm. For more information go to|
Rated 5 out of 5 by Joejoe from Product has features I was looking for Shopped around for other makes and always came back to the Generac reviews. Price is good. The company I bought it from Assembled it for me at no extra cost.I put in the oil and gas and started on the first pull. Tried all Receptacles on the generator. All worked. Bought it as a stand by in case we lose power.Good product
Date published: 2021-10-20
Rated 5 out of 5 by Hazel48 from Great features This generator is easy to set up and use. Had to purchase a new one when our old one went out when hurricane Ida hit. Very good product and happy with it. I highly recommend it.
Date published: 2021-09-17
Rated 4 out of 5 by Steveo from Needed in a pinch Purchased this model day before Hurricane Ida 8-28-21. Knew power would go out like it always does. Generators were hard to find with long lines everywhere. Me and two neighbors got lucky and picked up 3 at big box store as a truck just came in. I really wanted something larger to power more stuff, but all they had. We were out of power for 4-5 days and all 3 units performed well. The only negatives is this unit is noisy, I guess like many generators, and fuel thirsty. Went through 10+ gallons a day without any ac unit connected. Don't know how well this unit would do with a portable ac connected. If I had the time, would have picked a larger unit, and one without Cosence or that 50 state California CARB compliance nonsense and saved a few bucks there. Don't know the long term reliability because this is my use, but so far satified.
Date published: 2021-09-14
Rated 5 out of 5 by Nip from Easy to assemble, great that instructions on box So far it has performed well, Cosense got me so I turned generator 180 deg and didn’t have issue, gas nozzle would be better set off to side of tank for easier fill, bought after hurricane Ida
Date published: 2021-09-13
Rated 5 out of 5 by Richie53 from It is great It is easy to use. Love thr feature it has. It is a very reliable and nice to use it went light was off.
Date published: 2021-09-09
Rated 5 out of 5 by RedRobin2 from Gets the job done! When in need after a hurricane this was our best bet of keeping our house cool and fridge running!
Date published: 2021-09-06
Rated 3 out of 5 by Mycle from Co sense is garbage I only have two hours on mine, however my bro-n-law bought one same day. He put 52 hours on his and it quit running. We brought it back and they told us we were the 38th returned generac that day. They said the co sensor will not reset so that's why they stop running. It was outside in the yard, not inside....so yeah. Safety features aren't safe when you have an elderly mother about to die from Louisiana heat and you depend on a generator and a window unit. Now question is how long will mine last, I have power back and won't know until or next hurricane. Mom-n-law surving off my coleman with Subaru motor that I bought during Katrina in 05. Almost 20 years old and still running like a champ. This generac couldn't make it 52 hours.
Date published: 2021-09-04
Rated 5 out of 5 by Bradley from Plastic and cotter pins. So far seems like a good generator. That said there is more plastic than on my older 5000 (ie choke lever). One definite disappointment is the really cheap and flimsy old fashioned cotter pins used to hold the wheels on. Why not use a self retaining hex as on the handle and feet or at least a heavier slide on style retainer clip????
Date published: 2021-09-04
Behind every project is a True Value®
Thanks for signing up!
Please add email@example.com to your address book.
This functionality is enabled only for desktop.