Century 90A FC90 Flux Core Wire Feed Welder is lightweight and portable. It has a 30 percent duty cycle at 80 amp and an infinite welding volt to allow fine tuning of weld characteristics. The inverter power source is more efficient to operate and provides smoother weld characteristics than traditional welders. It has a 120V input power for convenience and automatically cools for safety. It has a 30 to 90 amp range and can weld 18 gauge to 1/4-inch mild steel. It has a maximum wire feed of 120 inches per minute and a minimum wire feed of 0 inches per minute. It has a 0.030mm minimum wire thickness and a 0.035mm maximum wire thickness. It has a 6 feet welding gun cable assembly length and a 6 feet ground cable length. It is CSA safety listed and comes with a 1-year warranty.

• 90A FC90 Flux Core Wire Feed Welder
• Lightweight and portable
• Ideal for maintenance and mobile welders
• 30 percent duty cycle at 80 amp
• Infinite welding volt to allow fine tuning of weld characteristics
• Inverter power source is more efficient to operate and provides smoother weld characteristics than traditional welders
• 120V input power for convenience
• Automatically cools for safety
• 30 to 90 amp range
• Welds 18 gauge to 1/4-inch mild steel
• Maximum wire feed of 120 inches per minute
• Minimum wire feed of 0 inches per minute
• 0.030mm minimum wire thickness
• 0.035mm maximum wire thickness
• 6 feet welding gun cable assembly length
• 6 feet ground cable length
• CSA safety listed