3/4"x3/4" PEXLock Swivel Elbow. This 90-degree bend is rated at 180 degrees at 100 psi and 73 degrees at 200 psi. NSF and CSA approved for new building behind wall and underground application. Easy to install using a pair of slip joint pliers, it can be removed with a straight head screwdriver and reused. Suitable for use with PEX pipe, vinyl hose, PEX A, and PERT Pipe. Freeze resistant and backed by a 25-year warranty. Bagged.
- Easy Installation
- NSF and CSA Approved
- 25 Year Warranty
- Can be used with PEX A, B, and C
- No metal to corrode, oxidize or pit
- No special install tools that require calibration
- Removable clamp. Clamp on/off with no degradation of PEXLock
- 3/8", 1/2", 3/4", & 1" sizes
- A high grade malleable polymer that resists freezing, cracking, and extreme heat
- 3/4 in. x 3/4 in.
- 90-degree bend
- Rated at 180 degrees at 100 psi and 73 degrees at 200 psi.
- NSF and CSA approved for new building behind wall and underground application.
- For installation use a pair of slip joint pliers.
- 25-year warranty.
- Bagged.
