Anderson Metals

1/2 In. Plastic Compression Sleeve

Anderson Metals

1/2 In. Plastic Compression Sleeve

$0.59

Online price. In-store price & availability may vary.

Selected store: change

×

Description

Anderson Metals 1/2" Plastic Compression Sleeve. It is suitable for use with gasoline, oil, vacuum lines, and water. Made from durable Delrin, this sleeve has a temperature rating of -65 to 250 degrees F. It is compatible with aluminum, brass, copper, and plastic tubing. Easy to disassemble, no flaring tool is required.
  • Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
  • Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
  • Easy To Disassemble, No Flaring Tool Required
  • Primary Uses: Water, Gasoline, Oil and Vacuum Lines
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
  • 3. Insert Tube Into Fitting
  • 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns

Specifications

Review