Model #
U702A
Item #
143116
SharkBite
Deburring/Depth Gauge
Deburring/Depth Gauge is rated
out of
5 by
2.
$15.99
In stock
Model #
U702A
Item #
143116
In stock
Description
1/4", 1/2", 3/4" & 1" deburring tool and depth gauge all in one; u702a; sharkbite push-fit fittings for use with copper tubing cts, cpvc and pex with integral tube liner included; constructed of dzr brass, certified to 200 psi and 200 degrees f, design certified to asse 1061/nsf61 standards, meets upc, ipc and cupc requirements, fitting are listed with iapmo and are certified for use on potable and hydronic water distribution, certified for underground applications and as a manufactured joint without the need for access panels.
- Lightning fast, won't let go.
- Easy installation, fast disassembly if needed.
- Use on wet or dry repairs.
- No solder, clamps, unions or glue
Specifications
| SKU | 143116 |
|---|---|
| Weight | 0.1000 |
| UPC | 00697285914629 |
| Country of Origin | AU |
| Package Width | 8.25 |
| Package Length | 5.0 |
| Package Height | 1.33 |
| Model Number | U702A |
| Brand | SharkBite |
| Assembled Width | 8.25 |
| Assembled Length | 5.0 |
| Assembled Height | 1.33 |
| Manufacturer Name | SHARKBITE/CASH ACME |
Rated 2 out of
5
by
Michael R from
Overall Tool Length Is An Issue
The length of this tool is a hinderance when working in tight quarters - when trying to deburr a pipe, there often isn't enough space to spin the tool 360 degrees. Individual size-specific deburr/gauge tools, perhaps resembling a wing-nut design, would take up a lot less space and be much more useful.
Date published: 2018-09-17
Rated 4 out of
5
by
Mike JS from
Useful, but know it's limitations
I was never a fan of "mechanical" seals behind walls until I helped my son-in-law rebuilding their bathroom. Still leary of hidden applications, but I made the jump and have used these when joining difference materials (as in old copper to CPVC). As a depth gage, very easy and useful.
For deburring the OD - useful, although I think careful use of a small knife works fine also. I suspect those who report "chattering" or the like may have been using too much pressure.
For deburring the ID - it was not intended for this purpose, which I find disappointing, given that the "seal" surface is the ID. I ensure a clean, burr-free ID by using a little emory cloth.
Date published: 2017-03-12
Behind every project is a True Value®
An an email subscriber, you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store(Optional)
Privacy Policy
Thanks for signing up!
Please add truevalue@message.truevalue.com to your address book.