Window & Door Latex Foam Sealant, 12-oz.
Designed to meet the tough standards demanded for professional window & door installations while effectively sealing large cracks, gaps and voids. This high-performance sealant is formulated with CoVinyl-X9000® for superior weather resistance plus added toughness and durability. When applied properly, this patented formula helps reduce energy loss and damage that can be caused by rain and pest infiltration. DAPtex® Plus is paintable, toolable, won't overexpand and the easy water clean-up formula won't leave a mess. Interior/Exterior use.
- High-performance sealant
- Superior weather resistance
- reduce energy loss
- Paintable and Toolable
- Will not overexpand
- Easy water clean-up
- Interior/Exterior use
- 12 oz
|Country of Origin||US|
|Manufacturer Name||DAP INC|
|California Residents Proposition 65||www.P65Warnings.ca.gov'.Cancer and Reproductive Harm '|
Rated 1 out of 5 by Bill from Definitely not usable in MN I used this product to seal around my door frame. Now that it has cured I was wondering what all the white sand like particles were on my carpet. I found out when this is touched it turns to a fine sand like particle. Seems very easy for any type of critter to get through and won't do the job very long. I've only had it in place for about 3 months but I wonder how long it will actually last. Great that it doesn't keep expanding and easy to clean up but it doesn't seem to be doing the job.
Date published: 2021-02-11
Rated 5 out of 5 by Den 2 from Foam caulking works great. Easy to work with. Doesn't over expand. Easy clean up. For deeper cracks a couple of layers worked very well and controllable.
Date published: 2021-01-13
Rated 4 out of 5 by Joe from Kokomo from I like this stuff What I REALLY like about this product is that you can clean it up with water and soap. The polyurethane stuff is so caustic that you practically have to wear a space suit to use it, and if you get it on you, it's on until your skin wears away. You also have to be more careful around carpets, furniture, etc. because it's near-impossible to remove--you need acetone to do a good job. You still need to keep DAPtex off you, but it's much milder.
Date published: 2019-11-16
Rated 1 out of 5 by T from Trigger broken Trigger never worked. Broken from start. Another hazardous waste drop off.
Date published: 2019-10-11
Rated 5 out of 5 by Bobo from Just what I needed Works as advertised but be aware, this is a horse of a different color. This is not the rushing, expanding type of product like all the others. It is very controllable. Just what I was looking for. Be advised that drying time is longer than the other sorts, but for certain projects you can't beat it. Clean up is a dream compared to regular expanding types. Read the instructions before you begin and you will not be disappointed.
Date published: 2019-03-15
Rated 5 out of 5 by Nathan from Minimum Expanding Foam Sealant We use it around Door and Window Frames. DAP Insulating Foam Sealant Does NOT over EXSPAND busting out walls. It Exspands Snug, which is just right, providing the barrier application we need.
Date published: 2019-01-10
Rated 5 out of 5 by kiki928 from Sealed up cracks with ease [This review was collected as part of a promotion.] Works well, and is easy to use without much mess.
Date published: 2019-01-09
Rated 5 out of 5 by NA from The DAP Foam is AMAZING [This review was collected as part of a promotion.] I have never been a fan of spray foam products; they typically overexpand and fill the joint, but then foam all over the wall/floor/ceiling etc. leaving you with a huge mess to clean up. This foam pretty much stopped expanding the moment it came out of the can. Within 5 seconds it stopped expanding and stayed exactly how I sprayed it. A single can contains enough for multiple small and medium sized uses and with water clean up, even the straw remains useable. The trigger is easy to use as well. There is only one con to this, and I think it is typical of most spray foam products. After about 24 hours, the foam is still slightly soft. It says on the can that curing can take up to 48 hours, though so this isn't a surprise. It is soft enough to work the next day (for those DIY homeowners who like to "drink on the job", this is a lifesaver), but this could be problematic for those who are on a tight schedule. This isn't really a major con, especially if the foam doesn't need to be painted, but it is a minor drawback. Overall, I highly recommend this product to anyone looking for a spray-foam in a can. It is easy to use, clean, and manipulate.
Date published: 2019-01-04
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.