Random Orbit Sander, 5-In., 2.4-Amp
5", 2.4a, random orbit sander, features paddle switch activation for easy on/off during application, runs at 1,400 orbits/minute, efficient material removal, compact size & ergonomic design that gets into tight spaces & maximizes user control, high performance dust collection to provide a clean work surface.
|Country of Origin||CN|
|Manufacturer Name||BLACK & DECKER/DEWALT|
|California Residents Proposition 65||www.P65Warnings.ca.govSome dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.|
Rated 1 out of 5 by Steve G from Poor Sander Design Pad mounting holes broke off. When I turned the device over, there were heat scorch marks where the 4 screws mount the pad to the sander. Replacement pad costs as much as new sander. Very poor design
Date published: 2021-06-25
Rated 5 out of 5 by bobskyy from Very Good Purchase I bought this orbital sander about two month's ago and am very pleased with the strength and durability of it. Great Purchase
Date published: 2020-05-14
Rated 3 out of 5 by RD18 from Good price had to replace it after a year This is a very affordable sander. I am a ho by woodworker and use it fairly often on small projects. The first one died and this is the replacement. Overall it’s price is good and worth the price for a low levels of work.
Date published: 2020-04-10
Rated 4 out of 5 by Pawn star from Inexpensive but not cheap! Bought this product after checking the prices of some other “major brands”. Great buy and does everything I need it to do and more. I would definitely recommend.
Date published: 2019-08-29
Rated 4 out of 5 by Steve woods from Great little tool One of my first purchases as a new woodworker trying to slowly upgrade tools. Works well for what it is intended to. Dust collection is good. Been using it for about 6 months now. Has started to make a squealing noise dont know where it is from but still works.
Date published: 2019-08-24
Rated 5 out of 5 by mysoleisblack from Solid sander I bought this for really heavy use sanding and smoothing end grain cutting boards which are extremely sanding intensive. It’s held up to the abuse no problem and has pretty decent suction on it’s little dust port. Very satisfied with the product quality at this price point.
Date published: 2019-08-24
Rated 2 out of 5 by Dave12 from Would not buy again. I bought the sander mostly because of the name of Black and Decker. I have had many of their tools over the years and they have been fine. The hook and loop wheel on the sander will not hold the sanding disks and wears off the back on the disks which really shortens the life of the disk. I used 20 disks for a job that should have taken 3-4 disks. I was going to replace the hook and loop wheel and 2 wheels cost more that a new sander.
Date published: 2019-02-23
Rated 1 out of 5 by AJ82283 from Bad Used this sander less than two hours total. Smelled something burning and then the bottom went flying off. Very hot to the touch, plastic melted. Doesn't seem to be very good quality.
Date published: 2018-06-04
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.