Snap-Back Arbor Extension, 12-In., 7/16-In. Chuck
12", snap-back, arbor extension, quick change for faster & easier to engage/disengage hole saw, prevents threads from stripping, drives off pins, not threads, no tools needed, prevents hole saw from locking on arbor, no adaptor required, arbor threads directly into all hole saws, easier plug removal.
|Country of Origin||CN|
|Manufacturer Name||AMERICAN SAW & MFG CO|
|California Residents Proposition 65||www.P65Warnings.ca.govSome dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information go to|
Rated 1 out of 5 by Mallory from Where are the instructions?? For all the professional electricians and whatever in these reviews saying it works fine and people just don’t know how to do it…please explain how to do it!!!! This comes with no instructions and I’ve looked all over the internet with no success and then I come here and all these professionals fail to help anyone on here understand. Thanks for nothing
Date published: 2021-09-11
Rated 1 out of 5 by Lenox Sucks from Worthless attachment AVOID! This product is terrible. There is no instructions and the ball for the quick release is not mentioned. If it is lost, the entire attachment is worthless. DO NOT GET THIS PRODUCT.
Date published: 2021-08-12
Rated 1 out of 5 by Gene from Cannot remove The quick release is a lie. Set screw cannot be removed. The sap open doesn't work. Poorly designed and hard to figure out how to use it. Avoid as it is a waste of money.
Date published: 2021-07-03
Rated 1 out of 5 by stumpy from Don't waste your time with this!!! No instructions on how to mount the saw to the arbor. I saw a set screw and assumed this needed to be loosened. Wrong move, as a small ball bearing fell out and now I can't get the thing back together. It's going back, along with the saw I purchased with it.
Date published: 2021-06-05
Rated 5 out of 5 by SamG from Pins not lining up when hole saw tight against arb For all of those complaining about the pins not lining up when hale saw is tight against arbor have never tried to get the arbor out to change saws. they do that so you can EASILY change saws with out having to use a vise and channelocks to remove it.
Date published: 2020-08-11
Rated 1 out of 5 by Glenn from NO INSTRUCTIONS I recently purchased this Quick Change Arbor and because there were no instructions, I do not know how to properly use it and will be returning it today.
Date published: 2020-07-05
Rated 1 out of 5 by BrianJ from Arbor is poorly manufactured Bought this arbor and the 76mm holesaw for use on 3mm checker plate. The holesaw cut the holes OK. However the arbor is a piece of junk. The “snap back” feature is achieved by a hex head set screw with a spring and ball which engages/disengages in a groove near the thread. The problem is the set screw unwinds whilst drilling and is flicked off along with the spring and ball which all are lost forever, the pins then disengage from the cutter and the drill screws down on the thread. I received a replacement from the store I bought it from thinking that I got a faulty unit. Nope the 2nd one did exactly the same thing. The Arbor is not cheap to purchase but flawed in design. You would think Lenox would apply some threadlock to the set screw as this would probably fix the problem. I would not recommend buying this Arbor as it continually fails.
Date published: 2019-05-19
Rated 5 out of 5 by Cody from Excellent arbor! These are some of the best arbors. I use them daily. They are easy to swap and easy to remove the slug. I don't understand all the negative reviews. I don't believe they are using the arbor correctly. Lenox makes good quality products.
Date published: 2018-12-04
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.