DeWalt
Magnetic Hard Joint Holder
Model #
DWHJHLD
Item #
162754
DeWalt
Magnetic Hard Joint Holder
Magnetic Hard Joint Holder is rated
out of
5 by
4.
$16.49
In stock
Model #
DWHJHLD
Item #
162754
In stock
Description
MAGNETIC HARD JOINT HOLDER WITH 2 BITS, Designed for Metal to Metal Fastening (Hard Joint), Internal Clutch mechanism delivers 5X longer bit Life. Robust shank for use in Impact Driver or Screw Gun. ON and OFF Switch gives user the choice to turn clutch ON or OFF Turn ON to minimize bit stripping, bit breaking and screw stripping
Specifications
| SKU | 162754 |
|---|---|
| Weight | 0.340000 |
| UPC | 00885911229791 |
| Country of Origin | TW |
| Package Width | 1.12 |
| Package Length | 3.88 |
| Package Height | 7.75 |
| Model Number | DWHJHLD |
| Brand | DeWalt |
| Manufacturer Name | DEWALT ACCESSORIES |
| California Residents Proposition 65 | Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information go to www.P65Warnings.ca.gov |
Rated 5 out of
5
by
RKY150471 from
Remove the bits with 2 fingers for Dummies
To easily remove the bit from the Impact clutch with only 2 finger.......
Move the clutch to off position, then pull the 1/4 hex stem back (you will feel a little play of no more than 2 mm) and hold it pulled with your one hand. With the other hand and with only 2 fingers pull the bit out.
Date published: 2020-03-20
Rated 2 out of
5
by
Papa Bill from
can't change bit?
I bought this a few days ago, but can't figure out how to change the bit. Can't give it a higher rating till I can do this.
Date published: 2020-02-27
Rated 2 out of
5
by
Papa Bill from
can't change bit?
I bought this a few days ago, but can't figure out how to change the bit. Can't give it a higher rating till I can do this.
Date published: 2020-02-27
Rated 1 out of
5
by
ajbuilds from
One Time Use Only
This is a one time use accessory that holds your bit with a permanent grip for the job worksite.
The only way you can remove your bit from the DWHJHLD IMPACT CLUTCH you need to use a hammer, large pair of vise grips and a vise to knock out your bit.
Date published: 2019-08-07
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store(Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.