Kreg
Shelf Pin Jig, 5mm Bit
Made in Usa
Model #
KMA3220
Item #
243007
Kreg

Shelf Pin Jig, 5mm Bit

Shelf Pin Jig, 5mm Bit is rated 3.8 out of 5 by 14.
  • y_2022, m_8, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_243007, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_truevalue
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 10.89ms
  • REVIEWS, PRODUCT
$50.99
In stock
Model #
KMA3220
Item #
243007

Online price. In-store price & availability may vary.

In stock
SHOP LOCAL STORES

Select a store near you to shop your independently owned local store.

Description
5 mm, shelf pin jig, makes easy work of drilling shelf pin holes, 6 hardened steel drill guides allow perfectly vertical holes for wobble free shelf placement, removable, dual position fence allows holes to be drilled from 1 of 2 distances from the workpiece edge, standard 32 mm hole spacing allows proper support & balance of shelving, built-in storage for locating pin, drill bit & depth collar, includes: 5 mm brad-point drill bit, locating pin for fast, accurate registration & complete owner's manual.
  • Six hardened-steel drill guides
  • Removable, dual-position fence
  • Standard 32mm hole spacing
  • Includes 5mm drill bit
  • Included locating pin for fast, accurate registration
  • Built-in storage for locating pin, drill bit, and depth collar
  • Kreg drill guides guaranteed for life
Specifications
Specifications
SKU243007
Weight0.680000
UPC00647096802783
Country of OriginUS
Package Width4.25
Package Length2.0
Package Height8.0
Model NumberKMA3220
BrandKreg
Manufacturer NameKREG TOOL COMPANY
California Residents Proposition 65Warning: This product can expose you to chemicals including Acrylonitrile and other chemicals, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov. Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Rated 5 out of 5 by from Great product, great customer service. Great product, great customer service. Helped me get exactly what I needed.
Date published: 2022-03-01
Rated 5 out of 5 by from Works great. For a clean Works great. For a clean hole Just need to not put to much pressure on the bit while drilling
Date published: 2022-02-18
Rated 5 out of 5 by from lo recomiendo excelente producto y facil de usar
Date published: 2021-12-24
Rated 4 out of 5 by from I wish they would just I wish they would just package a 1/4 bit wit the 5mm. Also needs to have a place to store the allen wrench.
Date published: 2021-05-25
Rated 1 out of 5 by from REALLY disappointed in this product I have a number of Kreg tools/jigs, and have loved every single one of them, until now. I've also received great service, until now. This product just does not deliver. I bought the 5mm, and the holes created with the 5mm drill bit are just too big for 5mm shelf pins. It's not as if they are just loose, they are sloppy loose, like fall-out-of-the-hole, loose. I tested 1/4" pins to see if those would work, but the holes are too small for the larger pins. I contacted Kreg via phone, and was told basically that that was just how it is. Pretty much, "all shelf pin holes are loose". I don't buy it. Unfortunately, I bought this.
Date published: 2021-02-03
Rated 1 out of 5 by from Shelf pin jib with 5mm bit This jig is incompatible with the 32 mm system. It does not have 37mm setback. You have a choice of 25mm or 50mm. Most hardware will not be compatible with these setbacks including drawer slides, hinges, lift-up hardware.
Date published: 2021-01-15
Rated 2 out of 5 by from Good Guide if Bit was Straight I have the same issue as mentioned by Andrew2020 in an earlier review. The 5mm bit that comes with the kit is not straight. This causes the bit to wobble and ultimately makes for a loose fit with the pins. Apparently this is a common problem with the 5mm bits. Being a Mechanical Engineer with 25+ years experience, my opinion is that it probably comes from the manufacturing process. It appears as if they start with the 1/4" bit and then turn it down to 5mm on the tip. If quality control is not super tight you will get this type of defect from numerous process variables. I would just switch to the 1/4" bit if I had not of already purchased hundreds of 5mm shelf pins.
Date published: 2021-01-14
Rated 5 out of 5 by from Great tool, easy to use Great tool, easy to use
Date published: 2020-12-09
  • y_2022, m_8, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_243007, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_truevalue
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.8ms
  • REVIEWS, PRODUCT
Thanks for signing up!

Please add truevalue@message.truevalue.com to your address book.

Shop a Local Store

Find a Store

Join True Value Rewards

Sign Up

Learn DIY Projects

Explore

Shop Your Local Store

Our True Value stores are independently owned and operated. Enter your City & State or zip code to see stores near you.
You can use the format: [City, State] or [zip code]