We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
Bosch
48-Pc. Impact Tough Screwdriving Custom Case System Set
Model #
SDMS48
Item #
255873
Bosch
48-Pc. Impact Tough Screwdriving Custom Case System Set
Impact Tough Screwdriving Custom Case System Set, 48-Pc. is rated
out of
5 by
2.
$34.99
In stock
Model #
SDMS48
Item #
255873
In stock
Description
Impact tough, 48 piece, screwdriving custom case system set, set consists of: insert bits: 2 phil #1, 6 phil #2, 2 phil #2 reduced, 2 phil #3, 2 combo bit p2r2, 2 sq #1, 6 sq #2, 2 sq #3, 5 torx #15, 2 torx #20, 1 torx #25, 2" power bits: 4 phil #2, 1 phil #3, 2 sq #2, 1 sq #3, 2 torx #20, 2 torx #25, 2.5" double ended power bits: 1 phil #2, 1 sq #2, 1 torx #25 & 1 standard bit holder, impact tough bit design provides 10x life, x-tended torsion zone helps to absorb high torque of new impact drivers, tilt-in/tilt-out case mechanism allows easier access to bits, customized storage configuration provides efficiency, so the right bit is always at hand, precision engineered bit tips deliver a tighter fit & less cam-out, heat treated bit manufacturing provides stronger bit, high visibility bit sleeve makes finding the correct bit for the job easier, durable case features a secure case latch & rubber bumpers.
Specifications
SKU | 255873 |
---|---|
Weight | 1.330000 |
UPC | 00000346493139 |
Country of Origin | VN |
Package Width | 10.0 |
Package Length | 1.65 |
Package Height | 10.0 |
Model Number | SDMS48 |
Brand | Bosch |
Manufacturer Name | ROBERT BOSCH TOOL GROUP |
Rated 5 out of
5
by
Brian1969 from
Grateful bit set
[This review was collected as part of a promotion.] Now I can find a full range of bits all in one place.
Date published: 2022-08-25
Rated 5 out of
5
by
XT sallaD from
Great modular system to create custom bit kits
These are great modular cases to create custom bit kits. The removable clips don't have pocket clips. Maybe Bosch with make a pocket clip that these clips can be attached to...
I bought the 48 piece because it has 6 bit clips. I found another bit case at a local hardware store which had 3 clips in it and wanted it mostly for the clips and some of the bits. I do wish it were easy to find Pozidriv and both metric and imperial hex bits made by Bosch. I have several other brands of bit boxes that I use to put my own custom bit assortments in for installation kits. I like this bit container because the clips can be easily removed and I can leave the case in my tool box and decided to try this out to possibly replace my other bit cases. It does work well for assembling custom bit kits with my own screwdriving bits, nut setters, drill and countersink bits, extensions and bit holders. I was hoping to see a way each clip could be clipped on to a pocket or belt or something. Once removed from the case the clip has to either be carried, put into a tool pouch or into a pocket. I use some really cool bit holders that do clip onto a pocket well and they're extremely useful. What if these clips could be clipped to something that fastens to the belt clip area of drill and driver handles? I would use that for sure.
The case is abs, has a rubber over-mold and is easy to open, it won't pinch your hand at the back of the hinge when you open it and the latch is spring tensioned so that it latches itself when you close the lid and the lid closes with minimal pressure but with a solid feel. Sort of like closing the door on a benz. Very nice. The silver behind the bits in the image is a loose card stock paper that is easy to remove. The clips have two different designs, one design is for 1" (25mm) and one is for powerbits with a ball-groove. The bit's are among the best value I've found for high performance bits and hold up as well as my industrial brand bits. Case is 6 ⅝" X 4 3//8" X 2 ⅛" (16.7 X 11 X 5.5cm) L x W x D. The case has 4 hexagonal recesses on the latch edge with 2 between each side of the latch and each corner. They will hold bits upright and not tightly. These are useful for a place to temporarily set bits for projects that require frequent bit changes. Bit's are easily placed and removed from the clips. The clips designed for longer bits have a recess that guides your bit when replacing it and helps locate it into the clip. It works best to first insert the base end of the bit perpendicularly into the clip where there is a hex shaped area which will help get the bit located properly and it can then be tilted over to lay flat and clipped in place. I like it!
Date published: 2017-10-30
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.