We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
SharkBite
Slip Ball Valve, Lead-Free, 3/4-In.
Model #
24736LF
Item #
214072
SharkBite
Slip Ball Valve, Lead-Free, 3/4-In.
Slip Ball Valve, Lead-Free, 3/4-In. is rated
out of
5 by
4.
$31.99
In stock
Model #
24736LF
Item #
214072
In stock
Description
3/4", slip ball valve, lead free, high quality forged brass with sharkbite connections, allows the user to connect the ball valves to copper tubing, cpvc & pex in seconds with relative ease, added slip feature for easy installation & simple replacement of an existing ball valve or allows installation in an existing line where there is little to no play in the pipe system.
Specifications
| SKU | 214072 |
|---|---|
| Weight | 1.390000 |
| UPC | 00697285247369 |
| Country of Origin | CN |
| Package Width | 6.61 |
| Package Length | 0.62 |
| Package Height | 1.39 |
| Model Number | 24736LF |
| Brand | SharkBite |
| Manufacturer Name | SHARKBITE/CASH ACME |
| California Residents Proposition 65 | This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Rated 5 out of
5
by
Thane S from
Space needed on rigid line
My main supply line valve was a compression type. It was corroded and leaking. So I decided to replace it. After the city supply valve was turned off, I cut out the old valve. All in all it's worked perfectly. However, here's what I'd like to communicate... The instructions say that it's supposed to cover a gap of up to 2in... Well, I cut the 2in section and it wasn't big enough for me to slip it on. So, long story short, I ended up cutting a total of 6&5/8ths out of the original pipe and using 3&7/8ths with a sharkbite coupling and the slip ball valve... That being said, maybe I could have just cut out 2&3/4ths inches. I haven't had full pressure for years because I was so nervous to mess with it.
Date published: 2021-03-29
Rated 1 out of
5
by
Meta from
Stopped working
Less than a year and the valve no longer works. We have freezing temperatures and I cannot turn off my water. Moving to Off position, water is still running.
Date published: 2021-01-31
Rated 2 out of
5
by
matthewd from
Slip valve is not looking enough
Had to replace and old gate valve that would not shut off. In the past I have used a shark bite ball valve and slip fitting. Saw this and was excited as it would reduce the number of connections needed. Ended up still needing another connection because every old valve was a half inch longer then this allowed. Would be a great product and get 5 starts if the slip end were longer.
Date published: 2020-11-22
Rated 5 out of
5
by
Frank B from
Quick installation
I cut off an inch to much of copper pipe and this was the perfect fix.
Date published: 2018-08-22
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store(Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.