We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
SharkBite
Disconnect Clip for Copper Tubing, 3/4 In.
Model #
U712A
Item #
143119
SharkBite
Disconnect Clip for Copper Tubing, 3/4 In.
Disconnect Clip for Copper Tubing, 3/4 In. is rated
out of
5 by
10.
$2.79
In stock
Model #
U712A
Item #
143119
In stock
Description
1/2"disconnect clip; bagged; u712a; sharkbite push-fit fittings for use with copper tubing cts, cpvc and pex with integral tube liner included; constructed of dzr brass, certified to 200 psi and 200 degrees f, design certified to asse 1061/nsf61 standards, meets upc, ipc and cupc requirements, fitting are listed with iapmo and are certified for use on potable and hydronic water distribution, certified for underground applications and as a manufactured joint without the need for access panels.
- Lightning fast, won't let go.
- Easy installation, fast disassembly if needed.
- Use on wet or dry repairs.
- No solder, clamps, unions or glue needed.
Specifications
SKU | 143119 |
---|---|
Weight | 0.020000 |
UPC | 00697285910867 |
Country of Origin | AU |
Package Width | 4.5 |
Package Length | 7.0 |
Package Height | 0.37 |
Model Number | U712A |
Brand | SharkBite |
Assembled Width | 4.5 |
Assembled Length | 7.0 |
Assembled Height | 0.37 |
Manufacturer Name | SHARKBITE/CASH ACME |
California Residents Proposition 65 | www.P65Warnings.ca.gov | This product can expose you to chemicals including cadmium which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
Rated 1 out of
5
by
geo worker from
disconnect clip
I have had no success with the disconnect tool. The white tubing does not come out. Your video makes it look easy but not so. I buy additional joints to take care of leaks, but that is more $$.
Date published: 2016-07-01
Rated 1 out of
5
by
Disappointed from
Absolutely worthless
I was told to buy the disconnect clip because it will be the best $2 you will ever spend. The Sharkbite fitting I installed did not seat the full 3/4 of an inch and when I tried to remove it with the disconnect clip, nothing moved. After pulling the clip towards the fitting with my right hand and pulling on the copper pipe with my left hand for at least 10 minutes, I decided it was better to make a second cut on the copper pipe below the Sharkbit fitting versus inadvertently bending the copper. I ended up making another trip to HD, buying a second fitting and a longer hose. I have taken the fitting with copper in it to my workbench and still cannot disconnect the copper with the clip. My experience with Sharkbite is buy double.
Date published: 2016-05-22
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.