We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
SharkBite
1 x 1 In. FIP Straight Connector, Lead Free
Model #
U094LFA
Item #
143022
SharkBite
1 x 1 In. FIP Straight Connector, Lead Free
1 x 1 In. FIP Straight Connector, Lead Free is rated
out of
5 by
2.
$17.99
In stock
Model #
U094LFA
Item #
143022
In stock
Description
1" x 1" fip straight connector, lead free, sharkbite push-fit, u094lfa, sharkbite push-fit fittings for use with copper tubing cts, cpvc and pex with integral tube liner included; constructed of dzr brass, certified to 200 psi and 200 degrees f, design certified to asse 1061/nsf61 standards, meets upc, ipc and cupc requirements; fittings are listed with iapmo and are certified for use on potable and hydronic water distribution. certified for underground applications and as a manufactured joint without the need for access panels.
- Lightning fast, won't let go.
- Easy installation, fast disassembly if needed.
- Use on wet or dry repairs.
- No solder, clamps, unions or glue.
Specifications
| SKU | 143022 |
|---|---|
| Weight | 0.350000 |
| UPC | 00697285465732 |
| Country of Origin | AU |
| Package Width | 8.25 |
| Package Length | 5.0 |
| Package Height | 1.67 |
| Model Number | U094LFA |
| Brand | SharkBite |
| Assembled Width | 8.25 |
| Assembled Length | 5.0 |
| Assembled Height | 1.67 |
| Manufacturer Name | SHARKBITE/CASH ACME |
| California Residents Proposition 65 | This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Rated 1 out of
5
by
Annon from
Installed as instructed, leaked everywhere
I cleaned my copper pipes the way the instructions pictured, marked the fitting, and water spewed out of the fitting like it wasn't even there.
Date published: 2020-05-29
Rated 3 out of
5
by
Todd247 from
Spinning limits range of applications
I bought an elbow, a female connector, and a male connector to replace a tub stubout that had disconnected at the solder joint in the wall. All went well with the SharkBite connectors until I tried to screw on the faucet. Because the copper tubing can spin there was no way to tighten the faucet. I now have to replace two of the connectors with others that do not spin. I am not looking forward to removing the sharkbit connectors--they are very difficult to remove even with the removal tool, and with their location in the wall it is very difficult to get the appropriate leverage on the tool. SharkBite needs to a better job warning people about applications. They tout the spinning as a feature, which it certainly can be in some applications--but in other applications it renders these connectors useless. On the positive side the connectors did not leak at all and I will use them in the future when I can.
Date published: 2016-04-12
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.