We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
National Hardware
Kick-Down Door Stop, Satin Nickel, 4 In.
Model #
N335-885
Item #
185331
National Hardware
Kick-Down Door Stop, Satin Nickel, 4 In.
Kick-Down Door Stop, Satin Nickel, 4-In. is rated
out of
5 by
2.
$9.99
In stock
Model #
N335-885
Item #
185331
In stock
Description
V238, 4", satin nickel, kick down door stop, used to prevent damage to the wall, the stop locks in the up position to allow the door to open freely, the ribbed rubber is for positive holding, spring design holds the stop in the up position, die cast zinc body.
Specifications
SKU | 185331 |
---|---|
Weight | 0.380000 |
UPC | 00038613335882 |
Country of Origin | CN |
Package Width | 1.31 |
Package Length | 1.31 |
Package Height | 8.63 |
Model Number | N335-885 |
Brand | National Hardware |
Manufacturer Name | NATIONAL MFG/SPECTRUM BRANDS HHI |
Rated 5 out of
5
by
TWL15 from
Great door stop!
I used this door stop for two large white vinyl gates. Even though it says it is for indoor use it works great and has held up well outside.
To install them I just opened the gate; set the doorstop where it would contact the ground securely, and then marked the mounting holes. Drilled the holes undersize for vinyl, and then mounted them.
After about 4 years the rubber foot is worn from the concrete, but I noticed that replacement feet are available (or, for price can just get new ones). Also, the white paint has held up great outside - still nice and shiny!
I would recommend these to anyone, even if you have to figure out where to locate them - not that hard.
Date published: 2023-07-10
Rated 1 out of
5
by
Newy from
where are the instructions?
I just bought of your kickdown door stops and 1 magnetic door stop with catch. There are no instructions on how far up on the bottom of the door you should drill the holes to mount the hardware. I have beautiful 6 panel doors and I don't want to drill the holes too high or too low and mess up my doors. It would be nice if you could show how high off of the floor to drill the holes so the door stops work properly. I don't see anything on your website showing this information either. The models I bought are, N184-275 and N328-195.
Date published: 2021-09-10
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.