Round Heat/Cool Thermostat
Classic round styling, mercury free thermostat with precise +/- 1 degree temperature control that eliminates temperature swings for more comfort. Easy to install. Works with heat pumps without auxiliary heat only.
- Classic round design
- Easy to install and operate
- Accurate to +/- 1 degree
- Works for heating and cooling
|Country of Origin||US|
|Manufacturer Name||ADEMCO INC|
Rated 4 out of 5 by JDOklahoma from Really needs a temperature swing setting I like the simple, classic design of this thermostat and the fact that it no longer contains mercury. As mentioned in other reviews this thermostat could really use a temperature swing setting. Once it hits the set point, it cycles the system off immediately. I have not had a chance to test this in the summertime, but for winter, it seems to cycle the furnace on and off about every 10 minutes. Granted, thermostat mounting location can have a lot of impact on this, but ours is located in an area where the previous programmable model (with digital swing adjustment) worked fine.
Date published: 2021-04-22
Rated 2 out of 5 by raski from Not very functional What I have noticed with this thermostat is when properly configured, it cycles the furnace way too often. The thermometer portion always reads lower than the actual temperature.
Date published: 2021-01-09
Rated 3 out of 5 by Wael from Thermostat I bought this device few days ago replacing old mercury one, unfortunately not working probably
Date published: 2020-12-21
Rated 2 out of 5 by Manager from Worked great untill it broke from something stupid I manage rental property so I get to try out different brands of everything. This unit cannot hold up to the abuse that (its not mine why should I care) renters inflict on the property. I wanted non-programmable and no battery operation. Well no where on the box did it say battery required, but it has 3 volt CR2450 in it...why? The broken part is easy to fix if you can find a replacement dial. There are two plastic tabs that surround the pointer that turns the pot inside, one tab broke off and now it is stuck on cooling.
Date published: 2020-10-02
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.