Anderson Metals 5/8" Plastic Compression Sleeve has a temperature rating of -65 to 250 degree F. It is suitable for aluminum, brass, copper, and plastic tubing. It is lead-free compliant, meeting California AB-1953 and Vermont SB-152 legislation certification. For ID copper tube size, reduce OD size by 1/8 inch. Easy to disassemble, no flaring tool required.
- 5/8 in.
- For polyethylene tubing
- Lead free compliant product which meets California AB-1953 & Vermont SB-152 legislation certification.
- Suitable for aluminum, brass, copper and plas.
- For gasoline, oil, vacuum lines and water.
- Temperature rating of -65 to 250 degree F.
- Primary Uses: Water, Gasoline, Oil and Vacuum Lines
- To Assemble:
- 1. Cut Smooth, Square End On Tubbing
- Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
- Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
- Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
- To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
- Easy To Disassemble, No Flaring Tool Required
- Primary Uses: Water, Gasoline, Oil and Vacuum Lines
- To Assemble:
- 1. Cut Smooth, Square End On Tubbing
- 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
- 3. Insert Tube Into Fitting
- 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
