We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
Diablo
Hole Saw, Carbide-Tipped, 2-In.
Model #
DHS2000CT
Item #
253676
Diablo
Hole Saw, Carbide-Tipped, 2-In.
Hole Saw, Carbide-Tipped, 2-In. is rated
out of
5 by
4.
$25.99
In stock
Model #
DHS2000CT
Item #
253676
In stock
Description
Diablo, 2'', carbide tipped hole saw, cuts both wood & metal, use on wood, nail embedded wood, plastic, aluminum, metal, cast iron, metal & stainless steel, delivers longer cutting life than bi-metal for faster cutting performance & increased productivity, 2-3/8" cutting depth for 40 percent deeper holes in single pass & increased productivity, variable tooth design for faster cuts, snap lock plus mandrel system for quick & easy changes with no down time, includes: mandrel, pilot bit, 5/8" threaded adapter fits diameters 1-1/4" to 6" & 1/2" threaded adapter fits diameters 9/16 " to 3-1/16", 1 size fits all mandrel fits all diablo holes saws in the carbide & bi-metal range, from 5/8" to 6" diameter, tool free plug ejection for fast material removal.
Specifications
| SKU | 253676 |
|---|---|
| Weight | 0.420000 |
| UPC | 00008925137733 |
| Country of Origin | CN |
| Package Width | 3.75 |
| Package Length | 5.65 |
| Package Height | 2.15 |
| Model Number | DHS2000CT |
| Brand | Diablo |
| Manufacturer Name | FREUD |
Rated 5 out of
5
by
vettereed from
Good for what I needed
I purchased this hole saw to cut through ceiling dry wall and 3/4 in. plywood subfloor in an attic to run multiple cables.
Date published: 2023-01-21
Rated 1 out of
5
by
Painter from
quick conect sucked
I bought the 1-1/4 hole saw two days ago I started to use it the quick connect was loose the hole saw only lasted two holes, cut a hole 1-3/8 , teeth broke off. I used a drill press at a speed of 200 with cutting oil on 3/8 plate steel . Quick connect would not work when taken apart would not allow me to reinstall hole saw, but the drill bit was great.
Date published: 2020-06-05
Rated 1 out of
5
by
Daniel33 from
Terrible Steel saw
Used a 2” saw to cut 1/2” steel. Made one hole at 280 rpm in a machine press with lots of fluid. After the first hole half the teeth were gone. Was able to make one more hole and all the teeth were done. Would not recommend for steel. The chuck system is pretty decent though.
Date published: 2019-03-14
Rated 2 out of
5
by
welder kelly from
fast in steel
did 1.5 inch holes in half inch steel. very aggressive. clamped solid at 120 rpm drill press with cutting oil, it bombed after 5 holes. all carbides were gone. sharpened what was left but the steel was to soft to cut anymore.
A typical essab bit lasted ten holes and was still going strong for 1/4 of the price.
recommend it for wood though.
Date published: 2019-01-04
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.