Prevent emitters from clogging by blocking particulates in water with the "Y" Filter. This component has a ¾ in. MPT connection point on both ends to connect to ¾ in. FPT spigot or pipe, such as a sprinkler riser in the ground. Pipe threads create a watertight seal when screwed tightly together. To install, position the directional arrow in the direction of water flow. The "Y" filter comes with a 150-mesh filter that's easily removable for maintenance; just unscrew the flush cap or cleanout cap, remove the middle housing, and pull out the filter to clean. The "Y" Filter is made of acrylonitrile butadiene styrene (ABS), and contains a polyvinyl chloride (PVC) washer with polyester filter, all treated with UV inhibitors

• Prevents particulates from clogging and potentially damaging emitters; Connect onto a ¾ in. FPT spigot or pipe, such as a sprinkler riser
• Thread ¾ in. MPT connection point to ¾ in. FPT pipe, such as a sprinkler riser
• Thread the "Y" filter onto the ¾ in. FPT spigot or pipe
• 150-mesh filter washer blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance
• Comes with one ¾ in. MPT X ¾ in. MPT "Y" Filter; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
• "Y" Filter can be flushed out by removing the flush cap or cleanout cap and running water through; also can be removed from the middle housing to clean