Add height to the emitter in your drip system using the 8 in. Sprinkler Stake with 4 in. Riser. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet or 10-32 threaded inlet on top of the riser. The riser sits on top of the sprinkler stake, where a barbed inlet fits 1/4 in. supply tubing. Position stake to provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

• Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; stake positions and secures emitter in place; Use with sprinkler, sprayer, or jet to water flower beds, planting beds, vegetable gardens, trees, shrubs, and container pl
• Attach low-flow emitter with barbed or threaded inlet to top of riser; attach 1/4 in. supply tubing to inlet on stake; position stake into ground near plant; Use with a low-flow sprinkler, sprayer, or jet emitter
• Barbed inlet on stake delivers water to emitter attached to riser; Riser is 4 in. long; stake is 8 in. long; Riser can be cut to size as needed; Removable and reusable when you want to move or change your drip tubing layout
• Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
• Comes with three Sprinkler Stakes with Risers; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling