Elevate the emitter in your drip system using the 12 in. Riser with 1/4 in. Barbed Inlet. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet on top of the riser. The riser is recommended to be placed on a 13 in. support stake, and has a barbed inlet which fits 1/4 in. supply tubing. Position riser to help provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

• Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; helps secure emitter in place; Use with sprinkler, sprayer, or jet to water flower beds, planting beds, vegetable gardens, trees, shrubs, and container plants
• Attach low-flow emitter with barbed or threaded inlet to top of riser; attach 1/4 in. supply tubing to inlet on a 13 in. support stake; position stake into ground near plant; Use with a 13 in. support stake
• Barbed inlet attaches riser to a stake and helps deliver water to emitter; Riser is 12 in. long; Riser can be cut to size as needed; Removable and reusable when you want to move or change your drip tubing layout
• Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
• Comes with ten Sprinkler Risers; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling