We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
Deck Flash Barrier
Deck Flash Barrier, 3-In. x 75-Ft.
Model #
DFB375
Item #
164258
Deck Flash Barrier
Deck Flash Barrier, 3-In. x 75-Ft.
Deck Flash Barrier, 3-In. x 75-Ft. is rated
out of
5 by
3.
$26.99
In stock
Model #
DFB375
Item #
164258
In stock
Description
deck flash barrier™ 3" x 75' roll. When applied to the top of deck joists, deck flash barrier™ creates a waterproof membrane that prevents wood rot and decay caused by the accumulation of water under the decking boards. deck flash barrier's new super grip adhesive can now be installed at temperatures down to 25 f. deck flash barrier™ self-seals around screws and nails, blocking a primary pathway for water infiltration into deck joists thus preventing wood rot, deck flash barrier™ creates a physical barrier that prevents corrosion of the metal surface caused by contact with acq ca-b, and acza treated lumber. Deck flash barrier™ can be used to protect metal flashing, joist hangars, the deck plates, sill plates and anywhere treated lumber is used.
- New Super Grip Adhesive
- Colder Weather Installation down to 35 F.
- Easy Peel and Stick Installation
- Dual Adhesive: Acrylic and Rubberized Asphalt
- Textured Surface for added traction
Specifications
| SKU | 164258 |
|---|---|
| Weight | 2.600000 |
| UPC | 00095959003752 |
| Country of Origin | US |
| Package Width | 6.75 |
| Package Length | 6.75 |
| Package Height | 3.0 |
| Model Number | DFB375 |
| Brand | Deck Flash Barrier |
| Manufacturer Name | COFAIR PRODUCTS INC |
Rated 5 out of
5
by
BMay from
Easy to use!
This stuff went on easy to our pressure treated deck joists. It sat on some parts for over a week in hot weather until we could get all the deck boards on. There were some small places that waited over 2 weeks. The stuff formed to the wood edge and stuck quite nicely. Some of the folded over edges came loose in the heat and the top tended to bubble, but when cooler weather returned it formed back up nicely. After that, it became very stuck and was not easy to pull off (which we did over a couple joints to change out a couple of boards).
I wish it could be bought in smaller portions. I needed about 15 feet more than I ordered.
One tip: the edge of the paper on the rolls first layer may be bent over from handling and storage. Straighten it out before unrolling otherwise the paper tears and is hard to remove on the first layer.
Date published: 2020-05-16
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.