Compression Sleeve, Plastic, 1/4 In.

$0.39

Online price. In-store price & availability may vary.

Selected store: change

Description

1/4" Plastic Compression Sleeve, For Polyethylene Tubing, Bulk.

Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
Easy To Disassemble, No Flaring Tool Required
Primary Uses: Water, Gasoline, Oil and Vacuum Lines
To Assemble:
1. Cut Smooth, Square End On Tubbing
2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
3. Insert Tube Into Fitting
4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns

SKU:	663179
Weight:	0.02
Country of Origin:	US
Package Width:	0.3
Package Length:	0.3
Package Height:	0.2
Model Number:	00560-04
Brand:	Anderson Metals
Assembled Length:	0.3
Assembled Width:	0.3
Assembled Height:	0.2
Manufacturer Name:	ANDERSON METALS CORP
California Residents Proposition 65:	Warning: This product can expose you to petroleum, a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov