Insert Tee, Lead Free, .75 x .75 x .5-In. Brass Barb
3/4" x 3/4" x 1/2", lead free brass barb insert tee, to make a 1/2" branch from a 3/4" run of cross link polyethylene pex tubing, secure the 1/2" barb end of fitting to 1/2" pex pipe with tv #608-933 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, secure 3/4" barb ends of fitting to 3/4" pex pipe with tv #608-826 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 California & vt s152 Vermont low lead restrictions.
|Country of Origin||US|
|Manufacturer Name||SHARKBITE/CASH ACME|
|California Residents Proposition 65||www.P65Warnings.ca.govThis product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to|
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.