We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
3M
Super 77 Spray Adhesive, Multi-Purpose, 7.3-oz.
Model #
77-10VOC30
Item #
343327
3M
Super 77 Spray Adhesive, Multi-Purpose, 7.3-oz.
Super 77 Spray Adhesive, Multi-Purpose, 7.3-oz. is rated
out of
5 by
92.
$9.49
In stock
Model #
77-10VOC30
Item #
343327
In stock
Description
3M, 7.3 Oz. Super 77, Multipurpose Aerosol Spray Adhesive. Same High Performance Now With Lower VOC Formulation, FDA Acceptable Ingredients (21 CFR 175.105). High Coverage With 90 SQFT Per Can, Bonds Many Foils, Plastics, Papers, Foams, Metals & Cardboard, Low Mist Formula, Heat Resistant Adhesives Up To 110 Degrees Fahrenheit, Fast Aggressive Tack With Shear Strength Up To 160 PSI.
- Aerosol Spray Adhesive
Specifications
| SKU | 343327 |
|---|---|
| Weight | 0.500000 |
| UPC | 00076308913175 |
| Country of Origin | US |
| Package Width | 1.9 |
| Package Length | 1.9 |
| Package Height | 5.7 |
| Model Number | 77-10VOC30 |
| Brand | 3M |
| Manufacturer Name | 3M COMPANY |
Rated 5 out of
5
by
RandomTux from
Absolutely Reliable Must-Have product
Ive been using 3M Super77 for 20+ years, never even once had an issue.
Used to permanently bond hundreds of different materials-and
when i say permanently, i bloody mean it! Its is like contact adhesive
and its never dissolved ANY foams for me.
NOTE- for best results use common sense and good practice, and read the entire label, but in addition, remember the 7 P's: Proper Planning and Preparation Prevents a P*ss-Poor Performance!
In a well ventilated area, prepare a temporary "spray zone", covered by taped-down card or paper, around the items you expect to bond-this zone will catch any overspray, which is a hard to remove, and attracts dust over time, giving you a carpet-like area of black crud. (acetone will get rid of this, but why waste time with cleanup, when a few moments of forethought will obviate this step)
Shake well, yes shake it good! Check visually that the spray button orifice isnt obstructed by previously dried adhesive. Dont be lazy, a blocked nozzle WILL spatter the spray pattern.
If it needs cleaning, pop it into a cup of turps or other thinner and agitate or leave for a few minutes until the dried glue is loose enough to remove.
Make sure spray button is replaced in the can aligned with the dot on the upper rim. This ensures the aerosol inner tube is well within the cans inner contents, even when near empty, also preventing intermittent spray delivery (spattered uneven glue blobs).
Correct distance to ensure even coat, 8-10 inches. The emerging flat fan spray pattern can be rotated 90 degrees, it is not a conical spray shape as car paint cans are, but can be adjusted to match your spraying direction (are you spraying from left to right, or up to down).
Test your material on a scrap before applying glue to parts, to ascertain whether what your'e sticking requires one or both of the parts to be sprayed, and whether a double coat is required on each side (obviously waiting 3-5 mins between coats), some absorbent surfaces like leather need 2 thin coats on each mating face, and allowed to dry to touch before bringing them together.
Bear in mind that because Super77 is freaking strong, its always better to put slightly more than you think is required, as separating underglued items to add more glue is next to baeucoup difficile, once dried.
Date published: 2020-10-29
Rated 1 out of
5
by
Gus F from
doesn't stick
I have been a fan and user of 3M products for the past 60 years.I have trusted their products until recently. I used one can of super 77 that I had in my shop and it worked and stuck all the foam squares to the ceiling of my VO studio The Batch number on the can was 7213CW/A12357/0138. When it ran out I bought another can. It's batch number is A93379329E/0343. Spraying the foam squares in the same manner I have had every one of the squares detach and fall. My faith in 3M products has dissolved because of this situation.
Date published: 2020-08-11
Rated 1 out of
5
by
hawk1 from
Bad for foam
I bought this to glue 'blue foam' insulation board together. Even though the can says it can be used on foam, don't use it! It will melt the foam.
Date published: 2019-04-11
Rated 4 out of
5
by
GDill from
Used to work great!
I use this product at my company to temporarily hold tooling together. For years this worked great but here in the last couple months I've noticed our tooling moving/shifting. Has anything at all in the formula changed?
Date published: 2018-07-25
Rated 1 out of
5
by
danb435 from
Adhesive bond failed after a few days
I used this product to apply tolex covering to a wooden enclosure. I carefully followed all instructions, the wood was clean and free of any contamination. Temperature was optimal. Everything looked OK until a few days later when several of the seams started to lift and would not stay stuck down. This is the second time I have had problems with this product, guess I should have learned the first time. Now I am out the labor and materials for the tolex installation. Hopefully, IF I can get the sticky goo from the wood, I can try something else on the enclosure as I certainly do not want to start over from scratch. I have a lot of respect for 3M products, this is a big disappointment.
Date published: 2017-12-21
Rated 5 out of
5
by
Barbie from
BEST ever
This is the "Best" SprayAdhesice ever!!!! I have tried others and they just don't stand up to 3M. I never use anything else.
Date published: 2017-05-24
Rated 4 out of
5
by
Mamat from
Holds well
[This review was collected as part of a promotion.] I received a free sample in exchange for a review. Holds well. I don't like the dispenser
Date published: 2016-12-22
Rated 4 out of
5
by
Esmer from
Very handy
[This review was collected as part of a promotion.] 3M gave me a free sample of this product to evaluate. I've used it on paper, fabric, and plastic. It works very well and it dries quickly. It takes longer to dry on fabric and plastic but its very effective. The only con that I would find in this adhesive is that its messy. The spray nozzle makes it so that the spray area is wide and less precise. So its better for bigger projects but if you're careful you can use it to glue almost anything.
Date published: 2016-08-18
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store(Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.