This is a stamped steel 2 in. round door pull with a classic bronze finish. It is pressed into the 2-1/8 in. diameter hole in the closet door and held in by a set of nails. Silicone glue may be required if the hole has worn larger. It is used by a variety of closet door manufacturer's doors. There are two pulls and four nails per package.

• Used on a variety of closet door manufacturers doors
• Used on bi-pass doors 3/4 to 1-3/4 in. thick
• Flush mounted 2 in. diameter door pull
• Stamped steel construction with a bronze finish