Banbury Handheld Shower Head, 5 Functions, Nickel, 4-In.
Banbury Handheld Shower Head, 5 Functions, Nickel, 4-In.
Banbury Handheld Shower Head, 5 Functions, Nickel, 4-In. is rated out of 5 by 24.
Moen Banbury spot resist nickel 5 function hand held shower head. Traditionally styled plated spray face with 4" spray diameter with easy dial spray settings. Includes 60" chrome hose and chrome backet. 2.0 GPM, CSA/ASME and CEC compliant and limited lifetime warranty.
|Country of Origin||CN|
|Manufacturer Name||MOEN INC/FAUCETS|
Rated 5 out of 5 by Paul from Great Products Our new house was fitted with all Moen products. As we upgrade and add new products, I always trust Moen. Their customer service is the best!!
Date published: 2016-09-07
Rated 2 out of 5 by BarbH from Durability Poor Loved the shower head for the first year. Right after the warranty ended the plastic connecting part cracked. No replacement parts available on this model ---- now must start over. Money down the drain!
Date published: 2016-07-29
Rated 5 out of 5 by patrick g from great product As always, I look to Moen for a great product and am not dissapointed.
Date published: 2016-06-03
Rated 5 out of 5 by Dave from Great Product Great Value I've been buying Moen Products for at least 30 years.
Date published: 2016-05-10
Rated 5 out of 5 by Marina from Easy installation & functional Easy installation. Handheld shower head is great for showering small children and pets.
Date published: 2016-02-07
Rated 5 out of 5 by mdg from the best Can't go wrong with this product and the MOEN brand . Always stand behind there product.
Date published: 2016-02-01
Rated 3 out of 5 by Scout from Poor build quality I installed the product and had problems with the strength of the plastic nut that screws onto the shower pipe. It leaked even with pipe dope and when I attempted to tighten it more it cracked. Then the plastic seal that goes between the orbital ball that allows the head to be somewhat movable when it is in its cradle leaked from the first installation. It to is held in place by a plastic nut which is not strong enough to tighten it to the point that the shower head will stay upright. Nice looking , Cheap Plastic nuts!
Date published: 2015-12-31
Rated 5 out of 5 by Nickel from Great Handheld Showerhead We purchased this on June, 2014 for our sons shower and were so please that we purchased it for our shower along with the Moen Rainshower, Velocity Collection. We are very pleased with these Moen products.
Date published: 2015-04-18
Rated 1 out of 5 by Dirty from non existent quality Junk. Had less than a month. have put in several shower heads over the course of several years. I would consider myself qualified to install one, being an industrial maintenance person for several years. the cheap plastic connector to the shower nipple. literally disintegrated and fell off the nipple, not cracked but fell apart like a piece of dried clay, i did not over-tighten it as i have broken these cheap fittings in the past and was not going to make the same mistake twice. i cant even find a part drawing to purchase replacement parts. do not buy this junk. i will contact Moen. o see if they will replace it
Date published: 2015-03-23
Rated 4 out of 5 by Patti D from Good Product! I purchased this shower head for ease of bathing the Grandchildren. It's true that the plastic packaging is difficult to cut but once that is accomplished, and you figure out where to install the filter washer, the bracket and hose ends are quite easily managed to complete the installation. Now I have to experiment using all the various settings!
Date published: 2014-11-24
Rated 3 out of 5 by Anonymous from Needs improvement Hose keeps breaking where it hangs down from the shower handle when it is in the bracket. Cannot buy replacement hose !!
Date published: 2014-02-06
Rated 5 out of 5 by Steverino from Arm bracket not adjustable enough The shower arm mounting bracket will not let the head come down low enough to let the head point straight down even when pivoted down as far as it will go. It appears the angle of the holder bracket is not perpendicular to the center line through the water flow line. If this was a 90 deg. angle it would allow the shower head to point down when in the holder and adjusted all the way down. It looks like the holder angle is maybe 15 deg. off of perpendicular. I have a Delta unit in another bathroom which has a 90 deg. angle and it adjusts far enough for the head to point straight down. Do you make a holder with a different angle (90 deg.) ?
Date published: 2013-12-10
Rated 1 out of 5 by Anonymous from where is my rating? I gave this product a low rating. Why isn't it in the reviews? Do you just list good ratings?
Date published: 2013-12-07
Rated 4 out of 5 by rasdan from easy to install It was easier to install than getting it out of the plastic container it came in. Seems to have nice water flow for a 2.5 gpm showerhead. Very satisfied.
Date published: 2013-10-18
Rated 3 out of 5 by jcwcpa from Just 3 stars 'tho installation is certainly not complicated, I had a question about washers - product comes w/ 3 different washers and no indication which goes where. Instructions w/ packaging are non-existant and no help online either. All in all, pretty good product, very poor consumer support.
Date published: 2013-06-05
Rated 5 out of 5 by DandJ from I bought two... Purchased one, moved, had to purchase another for the new place. Really like the Banbury shower head.
Date published: 2013-04-30
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.