We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
DeWalt
20-Volt Cordless Finish Nailer, 16-Gauge, TOOL ONLY
Model #
DCN660B
Item #
213726
DeWalt
20-Volt Cordless Finish Nailer, 16-Gauge, TOOL ONLY
20-Volt Cordless Finish Nailer, 16-Gauge, TOOL ONLY is rated
out of
5 by
23.
$339.00
In stock
Model #
DCN660B
Item #
213726
In stock
Description
20v, 16 gauge, 20 degree finish nailer, bare tool, 1-1/4" to 2-1/2" capacity, engine design allows consistent nail penetration into both soft & hard joints, sequential operating mode allows for precision placement, bump operating mode provides the user with production speed, 6 position dial allows the user to move between applications, easy access to the nosepiece for the removal of jammed nails, integrated led lights, portability & durability on the job site, work surface protection, for nails use tv #750-002, tv #750-107, tv #750-156 & tv #796-492.
- Bare tool
Specifications
SKU | 213726 |
---|---|
Weight | 6.000000 |
UPC | 00885911385411 |
Country of Origin | CZ |
Package Width | 4.38 |
Package Length | 13.06 |
Package Height | 12.38 |
Model Number | DCN660B |
Brand | DeWalt |
Manufacturer Name | BLACK & DECKER/DEWALT |
California Residents Proposition 65 | www.P65Warnings.ca.gov | Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information go to
Rated 5 out of
5
by
Jeff the builder from
Quite solid delivery of nail.
[This review was collected as part of a promotion.] An absolute must for trim on renovation jobs. Definitely get the angled nailer. This nailer can be super versatile with the 2 1/2” nails on Reno’s. Occasional oiling is needed for smooth operation . Nails almost never jamb but easy clip remove jammed nails if needed.
Date published: 2023-12-29
Rated 3 out of
5
by
LRGlad from
DCN660 Nail Driver
After about 200 nails the driver pin is already broke. Worked fine until then.
Date published: 2023-07-17
Rated 1 out of
5
by
UPRIGHT from
16 Gauge Angled Brad Nailer
The 16 Gauge Angled Brad Nailer is Piece of Garbage from the first day I purchased it it jambed an misfires an they have replaced the magazine an still same thing its unless
Date published: 2022-11-08
Rated 5 out of
5
by
Mohammad AlGammal from
Correcting my first review. A great tool!
I received my nailer earlier today, out of excitement, I opened it up, plugged in a battery, loaded some 2.5" nails and started shooting some wood using the bump mode. Everything went great. But when I switched to single mode, nothing happened! I thought the tool was defective. Then I read the manual and learned how to use the tool I single mode. I tested it and it worked. If you're new to these nailers like me, better to read the manual first!
The nailer is great, fast and powerful. I highly recommend it.
Date published: 2022-05-13
Rated 5 out of
5
by
Briguy from
16g finish nailer
This product save so much time and hassle. No goes to run and compressor! Works as good as a air nailer. Love this product
Date published: 2022-01-23
Rated 5 out of
5
by
Shane88 from
Safety and efficency
I do a lot of small jobs where I may remove trim from one room or a window and complete a repair. This nailer has saved me a ton of time and energy. It is great to not need to haul around the compressor and hoses in the truck just for a few pieces of trim. I have even been able to bless friend and family by making quick repairs when I have it with me. I have had a couple jams but it is a couple seconds to get fixed and back working. I would buy it again in a heart beat. so nice not having the noise of a compressor in the customers house or a hose to drag through making a mess and trip hazard.
Date published: 2021-12-23
Rated 5 out of
5
by
ACM7666 from
awesome nailer
[This review was collected as part of a promotion.] I bought this nailer for a job that was a rush . So thought it would save time rolling out air lines and compressor. The time I saved on that job and others that nailer has paid for itself 10 fold. I have since bought the other finish nailer's to add to my toys. Sold all my pneumatic finish mailers and went cordless.
Date published: 2020-06-04
Rated 5 out of
5
by
Silver fox from
Great Tool!
[This review was collected as part of a promotion.] My wife is a big fan of crown molding, and wanted it installed in several rooms of our 4 bedroom colonial home. We also have a family room and a living room. I did one room with a nail and hammer. It was backbreaking work for a retired banker, particularly driving the nail in straight and not splitting the crown molding. I was a frustrated and very tired puppy. I found help with the Dewalt Finishing Nailer. It was like my camera---just point and shoot! It was an absolute pleasure to use and saved me many future hours of tedious and tiring work. An absolute gem of a tool. It was also fun to use!
Date published: 2020-06-03
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.