This is a stamped steel 1-3/4 in. round door pull with a polished brass finish. It is pressed into the 2 in. diameter hole in the closet door and held in by a set of nails. Silicone glue may be required if the hole has worn larger. It is used on a variety of closet door manufacturer's doors. There are 2 pulls and 4 nails per package.
Used by a variety of closet door manufacturers
Used on doors 3/4 in. to 1-3/4 in. thick
Fits into a 1-3/4 in. mortise in closet door
Stamped steel construction with bright brass finish
