Polycrylic Aerosol Satin Water-Based Finish, 11.5-oz.
11.5-oz. Aerosol, Crystal Clear, Satin Polycrylic, Durable, Water Based Finish, Convenient Aerosol Spray, Dries To Touch In 1/2 Hour, Low Odor, Can Be Used On Painted Surfaces & Light Colored Stains.
|Country of Origin||US|
|Manufacturer Name||MINWAX COMPANY, THE|
Rated 4 out of 5 by Linleekow from Love the satin finish I just did a mahogany coffee table. Dries super fast. I did have a tiny bit of issues with drying too fast but I think the weather is too warm right now. I have minor shiner streaks. Wondering can put a coffee cup on it without coaster or will that cause rings? I have 2 end tables to do and would like it to go smoother. I did 4 coats trying to get it right. Don’t think the issue is the product but my application.
Date published: 2021-08-14
Rated 5 out of 5 by Amateur Hour from Love this stuff Uh-oh, I used this on my half bath floor after I painted and stenciled, but I see it's not recommended for floors. (Despite what Bob Vila says.) I've been washing with mild, soapy water. Thoughts? I also used it to seal a wax bowl that left residue on your hands and surfaces. Not to be used to food. It seemed to work well for both.
Date published: 2021-08-06
Rated 1 out of 5 by CeeCee from The spray is horrible to use I bought the product to use as a protective coat on my paintings and it was ok when there wasn't bubbles and I'll give it 4 stars but the spray is terrible. It spits and splatters and for some reason you have to stop after a couple passes and wipe it off or it will drop on the surface you're trying to cover. I thought with it being the more expensive one and with Minwax's reputation it would be the best buy. I was mistaken. So now i have to sand down my project again and I will be using a different company's products. The experience with the spray has been a waste of money and time and hours more work for me. Very disatisfied!!
Date published: 2021-05-21
Rated 5 out of 5 by Amanda from Perfect finish I was hoping for! I bought the Minxwax Polycrylic Clear Matte. It went on super easy with my paint brush and dried much fast than expected. I know it’s recommended to sand in between coats but I did not have to. Everything was easy and the finish came out perfect! I was scared I would lose the color tone to my table by putting a poly on it but this was perfect. It added just a touch of warmth but for the most part my table looks the same as before which is a relief because it took me hours upon hours to sand it and get the look and colors I wanted. Highly recommend.
Date published: 2021-05-12
Rated 1 out of 5 by Taya from Horrible Bubbles It's very difficult to apply the finish as it constantly bubbles. There was nothing on the can that warned of this problem or what to do about it. I searched online, found some solutions, but none really work. Now I have to spend another five hours sanding the desk down and try something else. I would never recommend this product to anybody.
Date published: 2021-03-29
Rated 1 out of 5 by Don-1 from The spray nozzle makes this product unusable I've have exclusively used Minwax products for all my wood finishing needs for many years. Love the Fast Drying Polyurethane (oil base). Today I purchased the Minwax Water Based Polycrylic Clear Gloss in the spray can, expecting the same level of performance. What I experienced was spitting and bubbling all over my project, requiring me to wipe it off, let it dry and sand it again. In the past, I have sprayed the water base through a spray gun with great results, but the performance of this spray can was abysmal and very disappointing. Because it was a small project, I chose the spray can to avoid the hassles of setting up and cleaning the spray gun, but at this point, that is my only viable solution. I am returning the Minwax Polycrylic spray and will be searching for alternative water based poly in a spray can that will perform as expected.
Date published: 2021-03-23
Rated 5 out of 5 by Nsoi from Sleek finish I recently painted our kitchen cabinets and applied rustoleum top coat to finish. I was so disappointed at how tacky it was, with high gloss and brush strokes highly visible. I decided to wet sand it and this time applied Minwax polycrylic matte and I am amazed at how clean the finish is. Also I love how easy it is to apply and that it's fast drying. Would highly recommend this.
Date published: 2021-03-14
Rated 5 out of 5 by The Little Red 1774 Farm from Love! Love! Love! I bought Minwax Ultra Flat Polycrylic to cover kitchen cabinets I painted in dark gray chalk paint that I tinted and mixed myself. I had a major failure with General Finishes flat poly, it dried white in the corners! Certainly not the look I was going for, very disappointed in General Finishes, over expensive subpar product. I decided to experiment with the Minwax Ultra Flat Poly...I whipped up a mixture of 50/50 Minwax Ultra Flat Poly with my base paint (without the Plaster of Paris) and then a 60/40 mixture of Minwax with my base paint (again no Plaster of Paris)...I covered the cabinets with 2 coats, a light sand with 320 grit, then a 3rd & final coat, I found the 60/40 Minwax & paint (not chalk) mixture gave me the best overall coverage, protection and look I was going for...the cabinets which are in our 1774 historic New England farmhouse came out gorgeous! The cabinets are flat with very minimal sheen, the same you’d get with wax over chalk paint, but are very durable and washable...and they’re holding up to our 4 yr old and his tractors so I consider that a big win! I then sealed the wood shelves we cut from 1” planks of 100+ yr old wood from the attic floors we replaced, the wood is protected but the finish is ultra flat, no sheen, absolutely perfect rustic look! I highly recommend this product if you’re looking for a flat but durable finish.
Date published: 2021-03-11
Behind every project is a True Value®
Thanks for signing up!
Please add firstname.lastname@example.org to your address book.
This functionality is enabled only for desktop.