We use cookies to give you the best online experience. By using our website you agree to our use of cookies in accordance with our Privacy Policy.
SharkBite
1/4 x 1/4 In. Push Kit Pipe Coupling, Lead Free
Model #
U004LFA
Item #
147222
SharkBite
1/4 x 1/4 In. Push Kit Pipe Coupling, Lead Free
1/4 x 1/4 In. Push Kit Pipe Coupling, Lead Free is rated
out of
5 by
15.
$9.49
In stock
Model #
U004LFA
Item #
147222
In stock
Description
1/4" x 1/4", Lead Free, Push Fit Coupling, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC & Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI & 200 Degrees Fahrenheit, Design Certified To ASSE1061/NSF61 Standards, Meets UPC, IPC & CUPC Requirements, Fittings Are Listed With IAPMO & Are Certified For Use On Potable & Hydronic Water Distribution, Certified For Underground Applications & As A Manufactured Joint Without The Need For Access Panels, Bagged.
Specifications
| SKU | 147222 |
|---|---|
| Weight | 0.090000 |
| UPC | 00697285008045 |
| Country of Origin | AU |
| Package Width | 4.5 |
| Package Length | 7.0 |
| Package Height | 1.0 |
| Model Number | U004LFA |
| Brand | SharkBite |
| Manufacturer Name | SHARKBITE/CASH ACME |
| California Residents Proposition 65 | This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Rated 5 out of
5
by
Ed34 from
Great time saver
Use of SharkBite brass push coupling saved many hours remodeling my plumbing system.
Date published: 2020-11-07
Rated 5 out of
5
by
frankg from
Great product
a great solution to sweating in a tight spot also great for kitchen remodel before sink is in.
Date published: 2020-09-01
Rated 5 out of
5
by
EricB from
Fast and easy 1st time repair!
I unfortunately had to use 2 couplers and a slip connector this weekend to repair pinhole leaks in 2 different pipes. These things are amazing! I was able to do the repairs quickly with the sharkbite products.
Date published: 2018-02-18
Rated 5 out of
5
by
Tim P from
Ice maker kit
This is by far one of the best kits I’ve ever used to install a proper water line to a refrigerator. It’s easy and built really well.
Date published: 2017-12-24
Rated 5 out of
5
by
Brian H from
Time saver and leak free
Had pinhole leak from corroded soldered joint. Was soldered five years previously but not a good solder job by young plumber. Replaced with shark bite 90 deg and union 1/2 to 1/2 for short lenght of 1/2 pipe.
Date published: 2017-12-19
Rated 5 out of
5
by
Michael12 from
Effortless installation, total reliability,
Struggled trying to solder a regular fitting. Purchased SharkBite coupling and I was finished in minutes.
Date published: 2017-12-05
Rated 5 out of
5
by
rick W from
A MUST FOR EVERY HOMEOWNER
Follow the easy directions, make sure the pipe is cleaned with sandpaper ....amazing product!! Try it, you'll like it!!!
Date published: 2017-09-01
Rated 5 out of
5
by
Michael M from
Tremendous product
A friend mentioned these to me. So glad he did. I used sharkbites to install a new water heater. I'm not the most mechanical guy...no way I could have soldered new lines in for a water heater. Using these I saved $400 paying someone to install a new water heater. No leaks and FAST! The most time consuming part was draining the old tank. Buy and use these!!!
Date published: 2017-08-07
Behind every project is a True Value®
As an email subscriber you will receive exclusive in-store offers, online-only coupons, and helpful project tips and advice.
Privacy PolicyPlease select your preferred store (Optional)
Privacy PolicyThanks for signing up!
Please add truevalue@message.truevalue.com to your address book.